Yard Vacuum User Manual

Safety Information (continued)

DANGER - Indicates a situation which, if not avoided, will result in serious

injury or death. This signal word is limited to the most extreme situations.

WARNING - Indicates a situation which, if not avoided, could result in

serious injury or death.

CAUTION - Indicates a situation which, if not avoided, can result in damage

to the machine.

WARNING

The Kontrol-Karrier is designed to handle one drum of the types listed under Machine Description. DO NOT

attempt to handle any other type of drum or object. DO NOT exceed the weight capacity of 1,500 Lb. full

drum and 800 Lb. half-full drum.

WARNING - Do Not Modify the Unit

Under no circumstances should any modifications be made to the Morse machinery without factory authorization.

Any modifications may void the warranty. This machine was designed to perform a specific job and alterations

may result in injury to operator or machine.

WARNING - No Loose Fitting Clothing

Wear close-fitting clothing and safety equipment appropriate to the job. Loose fitting clothing may become

caught on the machinery and cause severe personal injury.

WARNING - Wear Safety Shoes

Wear safety shoes with non-slip soles and hard toe protection.

WARNING - Watch Out for Pinch Points

Stay clear of moving parts.

CAUTION - DO NOT allow drum to impact on floor, ground, or dumping station, etc.

Important

1. Review the Material Safety Data Sheet(s) for the material(s) in the drum(s) and take all necessary precautions. Safety shoes,

work gloves, hard hat and other personal protective devices are recommended.

2. Please read all instructions thoroughly before attempting to operate your new MORSE drum handler.

Machine Description

1. Models 195A-1-115, 195A-3-230, and 195A-3-460 have a maximum capacity rating of 1,500 Lb. full drum and 800 Lb. half-full

drum and are designed to lift, move and pour a 55-gallon steel drum. DO NOT exceed these ratings. Exceeding these ratings or

handling drums other than those mentioned above is unsafe and could result in equipment damage, excessive wear or awkward

handling. Options and accessories are available for Kontrol-Karriers to enable handling different sizes and types of drums (see

Options and Accessories).

2. The models 195A-1-115, 195A-3-230, and 195A-3-460 are “Group 1 - Structural and Mechanical” Below-the-Hook Lifting Devices

which are covered by the American National Standard ANSI/ASME B30.20. The user should comply with all aspects of this

standard.

3. When loading, unloading, operating, or maintaining your MORSE drum handler, always use care and good judgment. Maintain

secure footing and a firm hold. Keep hands and loose clothing away from all moving parts. Never allow anyone to be below any

part of a raised drum handler or drum. Read operating instructions and review the pictures in the sales brochure before operation.

The Specialist In Drum Handling Equipment

MODELS 195A-1-115, 195A-3-230,

and 195A-3-460

Kontrol-Karriers with AC Power Tilt