Manual

The general behavior of the pre-programmed MU is searching, detecting and following.
When MU detects a target object, it will play a sound and drive the toy to follow it. Otherwise
MU will drive the toy around to find the target. Note that If multiple target objects appear, MU
might switch between the targets.
You should adjust the mount direction when the target mode is changed to make it easier for
MU to spot the target.
NOTE: The viewing angle of MU is about 40° horizontally in front of the camera. MU might not
respond to a target If the distance between them is more than 1 meter. MU also works better in
good lighting conditions and might have trouble finding object in low light situations.
Please vision www.morpx.com to get more details about the different modes of MU. We have
some videos that show you how to play with MU in each mode.
Q
＆
A
Q: My MU cannot be turned on.
A: Charge MU to make sure its battery is full. If it still does not work, reset MU and try to turn it
on again. To reset MU, insert a thin needle tip to the reset whole on the bottom of MU until you
hear a button click sound
Q: My MU cannot respond to a target object.
A: Make sure the camera is facing forward, and possibly adjust the angle of the mount. Try to
give it an easy target object to follow.. Make sure MU is working in the right toy mode and target
mode. Also, make sure both MU and the toy is fully charged.
Q: When I charge the battery, the charging light is blinking
A: This might be due to a battery error. Try to detach and plug in the Micro-USB cable again. If
this does not work, contact [e-mail] for help.
If you have other questions, please post it on forum.morpx.com. Someone in the MU team will
reply to the posts. Alternatively, you can
contact [e-mail]. Thank you!