User Guide

ManualsBrandsMorphy Richards ManualsOtherIB75222

Heated Bedding

Please read and keep these instructions

getting the best from your

new heated bedding...

Safety

• For your safety, the in-built system in this product will

automatically shut off the power if it reaches a

temperature that is higher than considered comfortable.

It will also shut off automatically if any unsafe situation

should arise.

Washing instructions

• Before washing, detach the switch control and lead

from the blanket.

www.morphyrichards.com

0870 060 2616

1800 409089

Switch 11 1100 Rev 1 15/4/05 1:25 PM Page 1

Summary of content (8 pages)

PAGE 1
Switch 11 1100 Rev 1 15/4/05 1:25 PM Page 1 11 Heated Bedding Please read and keep these instructions 0870 060 2616 1800 409089 getting the best from your new heated bedding... Safety • For your safety, the in-built system in this product will automatically shut off the power if it reaches a temperature that is higher than considered comfortable. It will also shut off automatically if any unsafe situation should arise.
PAGE 2
Switch 11 1100 Rev 1 15/4/05 1:25 PM Page 2 All Morphy Richards heated blankets have been manufactured to the highest European standards. This product has been comprehensively tested for all known safety situations, so you can relax in the knowledge that it will provide warmth, comfort and peace of mind. IMPORTANT INSTRUCTIONS PLEASE READ CAREFULLY AND RETAIN FOR FUTURE USE Personal safety Important safety instructions • Do not use with a helpless person, an infant or a person insensitive to heat.
PAGE 3
Switch 11 1100 Rev 1 15/4/05 1:25 PM Page 3 Electrical requirements adaptor. If you are unsure, please contact a qualified engineer. It is quite normal for the switch to become warm as the components encased are part of the protection circuit. Check that the voltage on the rating label of your appliance corresponds with your house electricity supply which must be A.C. (Alternating Current).
PAGE 4
Switch 11 1100 Rev 1 15/4/05 1:25 PM Page 4 A Fitting instructions Fitted underblanket with elasticated corner tapes 1 Place the mattress cover directly on the mattress with the control switch end at the head of the bed. 2 Turn the elastic corners underneath the mattress to secure in place (see diagram A). 3 Ensure all creases are smoothed out. Switch control Note: Braille markings are located on the back of the switch.
PAGE 5
Switch 11 1100 Rev 1 15/4/05 1:25 PM Page 5 How to use Sleep button 1 Ensure the blanket is fitted to the bed correctly. 2 Plug the power lead into the closest socket, using an extension lead if needed to ensure that the lead is not stretched. 1 Use this button to turn the heat on for 30 minutes when the timer has switched the heat off. 2 Press the central blue button once. 3 The small light at the base of the switch will flash to indicate that the sleep function has been activated.
PAGE 6
Switch 11 1100 Rev 1 15/4/05 1:25 PM Page 6 Washing instructions Hand washing WARNING: Before washing ensure that you detach all the controls from the blanket. • Do NOT dry clean • Do NOT iron 1 Measure the blanket so it can be stretched back to its original size whilst wet. 2 Only use in a washing machine with a drum large enough to take the blanket without forcing it in. Machine washing 1 Unplug the blanket from the power socket.
PAGE 7
Switch 11 1100 Rev 1 15/4/05 1:25 PM Page 7 After sales service If the blanket fails to operate, check the following before returning: 1 Ensure that the plug and socket have not become disconnected. 2 Check that the supply plug is correctly connected to the flex. 3 Check the supply fuse and the 3 amp plug fuse if applicable. For further help and advice, please contact our Helpline.
PAGE 8
Switch 11 1100 Rev 1 15/4/05 1:25 PM Page 8 Your three year guarantee To qualify for the 3 year guarantee the appliance must have been used according to the manufacturers instructions. It is important to retain the retailers receipt as proof of purchase. Staple your receipt to this back cover for future reference. Please quote the following information if the product develops a fault. These numbers can be found on the rating label attached to the blanket.