Short Cuts Cordless hair cutting system Model 26003 Instructions
Thank you for buying your new Morphy Richards, Mark Hill cordless hair cutting system. Please read these instructions carefully before use and keep in a safe place for future reference.
Attachment combs 2 Slide the arms of the comb attachment carefully into the grooves of the clipper body until the comb teeth sit firmly against the clipper blade. (fig 2) Push down on the comb attachment until it snaps into the clipper grip points creating a ‘clicking’ sound. Your clipper comes with 2 adjustable attachment combs with 5 settings each. • Small attachment comb is adjustable to the following hair lengths.
For even cutting, allow the comb attachment cutter to cut its way through the hair. Do not force it quickly. 2 The clipper can also be charged when positioned in the stand. Plug the small end of the adaptor into the recharging stand (fig 6) and plug the adaptor into the electrical socket. Comb hair frequently to remove trimmed hair and to check for uneven strands. To remove the comb attachment 1 Lower the comb attachment to the lowest position. 3 The red power light will illuminate when charging.
Important safeguards Corded use 1 Be sure the power switch is in the off position. When using your appliance, basic safety precautions should always be followed. 2 Plug the clipper into the electrical socket. 1 Read all instructions carefully. 3 Slide the power switch to the on position. When finished clipping, turn the clipper off by sliding the power switch down. 2 Use the appliance for its intended use only.
Two Year Guarantee It is in your interest to retain the retailers receipt as proof of purchase. Please quote the model number if the product develops a fault. This number can be found on the product. All Morphy Richards products are individually tested before leaving the factory. In the unlikely event of any appliance proving to be faulty within 28 days of purchase it should be returned to the place of purchase for it to be replaced.
