Coffeemaker User Manual

88
EMPTYING,
CLEANING &
STORING
WARNING: Cleaning should
only be carried out with the
plug removed from the
socket. The fryer should
have completely cooled.
Allow 3 hours for cooling.
1 Remove the lid.
2 Remove the basket.
3 Take the oil storage container
and remove the lid, ensuring the
filter is left in.
4 Lift out the tank J and carefully
pour the oil from the corner of
the tank, K into the oil storage
container.
• Once the oil is in the storage
container screw the lid back on.
5 Wash the lid, basket, handle,
ladle and the inside of the tank
by hand with hot soapy water.
• The lid can be washed in a
dishwasher.
• The basket and tank should
NOT be washed in a
dishwasher.
6 Clean the body of the fryer with
a warm moistened cloth,
washing up liquid can be used.
WARNING: Never immerse
the control panel in water,
if required remove any
stains with a moistened
cloth.
7 Dry all parts of your fryer
thoroughly and reassemble all
parts with the max and min at
the back of the oil tank. Refer to
the ‘Assembly Sequence’ on
page 4.
• The outside of the tank is not
non-stick coated, if care is
taken, it is unlikely to become
dirty. If oil does drip down the
exterior when the oil is being
emptied out, make sure that it is
hand washed thoroughly. The
exterior may appear
discoloured, this is quite normal
and will not detract from the
performance of the fryer.
8 Place the basket back into the
tank, then the oil storage
container and ladle L. This
allows for efficient storage.
HELPLINE
If you have any difficulty with
your appliance, please do not
hesitate to call us.
We are more likely to be able to
help than the store from where
you bought it.
Please have the following
information ready to enable our
staff to deal with your query
quickly.
• Name of the product.
• Model number as shown on the
underside of the appliance.
• Serial number as shown on
underside of the appliance.
UK Helpline 0870 0602604
Replacement Parts 0870 1676635
Ireland Helpline 1800409119
J
K
L
45076 rev1 22/3/07 08:52 Page 10