user manual

3
33
Plug the coffee maker into the mains.
2
Ensure the On/Off Switch (10) and Steam Control
(1) are set to Off. Select Coffee (8).
11
Fill the Espresso Water Tank (13) and place into
the coffee maker.
7
Slide and release the Espresso One (6)
or Two
Cup
(7)
Switch to start brewing the desired
amount of coffee.
6
Slide the On/Off Switch (10) to on. The
Temperature Indicator Light
(9) will stop flashing
when the coffee maker is ready.
55
Insert the Espresso Filter Holder into the Brewing
Head
(3) turning anti-clockwise until it locks into
place. Place your cup(s) under the Dispenser
(25).
4
Place the relevant Filter (26) or (27) into the
Espresso Filter Holder (24). Fill with espresso
coffee and tamp with Tamping Spoon (28), or
use an E.S.E. pod.
Making espresso coffee
8
To stop or cancel the brewing process, slide
and release the switch again.
47160 rev3_Layout 1 02/09/2011 13:57 Page 3