Owner`s manual

5
4
Press the Release Button (5) and gently pull
the Blending Leg to remove. Rinse the
Blending Leg in running water.
3
Select the speed on the Speed Control (1) and
press and hold the On Button (2) to start.
Release the button to stop BEFORE removing
the Blending Leg from the food.
2
Place leg into food to be blended. DO NOT
blend in the Chopping Bowl (10). Use the
Measuring Beaker (8).
1
Insert the Blending Leg (6) into the Main Unit
(4) and click into place.
• WARNING: Your Accents Hand Blender is
designed for intermittent use. Do not use
non-stop for more than 1 minute. Allow to cool
down for a minimum of 5 minutes before further
use.
• The Blender Leg (6) is fitted with a special blade
suitable for crushing ice. It can be used to crush
ice cubes to produce fine ice for cocktails, cold
drinks etc.
1
Place a maximum of 4 ice cubes in the Measuring
Beaker (8).
2
Press firmly down on the ice cubes with the
blender, using a plunging action until the ice
cubes are fine ice pieces.
• DO NOT crush ice in the Chopping Bowl (10) as
it will damage the blades.
• Note: The ice cubes need to be able to project
into the blender head to be crushed by the
Serrator Blade (7).
Crushing Ice
Usage
Using your Accents Hand
Blender
• WARNING: Carefully unpack your Accents Hand
B
lender as the blades are very sharp.
• Wash all parts before first use, except for the
b
lender body, see the ‘Cleaning’ section on page
7 for instructions.
Before first use
402010 rev3.qxp_Layout 1 14/11/2014 13:35 Page 5