manual

2 3
4
Pour the water from the kettle.
CAUTION: The kettle and the water will be
hot.
3
When boiled, the kettle will automatically
switch off. Remove from the Cordless Base (7).
2
Place the kettle on the Cordless Base (7) and
press the On/Off Switch (6).
Using your kettle
1
Fill the kettle with water by removing the Lid (2),
or through the Spout (3). Do not fill past the
MAX line.
1.
Open the Lid (2).
2.
Pull the Filter Location Tab (10), push the Filter
down to unhook from the lip of the kettle and pull
away.
3.
To re-fit the Filter, slide it up into the lip of the
kettle and push the Filter Location Tab into the
catch below the Spout (3).
WARNING: The Filter must always be fitted to
the kettle.
Removing the Filter (9)
Before using your kettle for the first time,
f
ill with water, boil and pour away.
Before first use
101401 rev3.qxp_Layout 1 13/10/2014 12:26 Page 5