RN42221MUK Rev3_IB 22/08/2012 10:57 Page 1 RN42221MUK Rev3 * Upon registration with Morphy Richards (UK & ROI only) Steam Generator Please read and keep these instructions for future use For competitions, product hints and tips and more join us at www.morphyrichards.co.uk/blog www.facebook.com/morphyrichardsuk @loveyourmorphy * Register online for your 2 year guarantee. See back of this instruction book for details.
RN42221MUK Rev3_IB 22/08/2012 10:57 Page 2 Important safety instructions This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience or knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
RN42221MUK Rev3_IB 22/08/2012 10:57 Page 3 Steam generator overview 1 2 4 3 5 12 13 14 6 7 8 9 10 11 (1) Steam trigger (5) Iron (10) Cord storage groove (2) Temperature dial (6) Filling cap (11) Cord clamp (3) Soleplate (7) Detachable water tank (12) Boiler key (4) Temperature indicator light (8) Control panel (see below) (13) Boiler screw (9) Base unit (14) Boiler cap Control panel (8) overview On/Off button 15 Power indicator light 16 Low water level indicator light 17 Des
RN42221MUK Rev3_IB 22/08/2012 10:57 Page 4 Temperature guide Heat setting markings on the temperature dial of all Morphy Richards irons match those of the International Textile Care Labelling Code Symbol Control dial positions Steam level setting (see step 4 of ‘Using the Steam Generator for steam ironing’ on page 5) Do not iron (120°C Max) Cool (160°C Max) Warm (210°C Max) Hot • •• ••• No steam (see ‘Dry ironing’ on page 6) Low Medium / High Fabric Nylon, Acetates, synthetic fabrics Ironing
RN42221MUK Rev3_IB 22/08/2012 10:57 Page 5 Using the Steam Generator for steam ironing 1 2 If steam ironing, remove the detachable water tank (7), lift the filling cap (6), and fill with water to the max fill line. Replace the water tank. Plug the appliance into a mains outlet and press the On/Off button (15) to activate the unit. 3 Turn the temperature dial (2) to suit the garment (see Temperature guide on page 4). The temperature indicator light (4) illuminates until the temperature is reached.
RN42221MUK Rev3_IB 22/08/2012 10:57 Page 6 Auto shut-off (certain models only) Filling If the steam trigger (1) is unused for 10 minutes, the product will automatically turn off, both for safety and to save energy. IN HARD WATER AREAS, WE RECOMMEND A MIX OF 50% TAP WATER AND 50% DISTILLED OR DEMINERALISED WATER. To restart, press the On/Off button (15) (see step 2 of ‘Using the Steam Generator for steam ironing’ on page 5) and wait for the temperature to rise again.
RN42221MUK Rev3_IB 22/08/2012 10:57 Page 7 3 Hold the base unit (9) firmly with both hands and shake well. 4 Turn the base unit (9) upside-down and pull back the boiler cap (14). Unscrew the boiler screw (13) with the boiler key (12), which is attached to the underside of the base unit. A suitable screwdriver or socket can also be used. 5 Hold the base unit (9) over the sink, turn the unit the correct way up to empty all water and loose scale from the boiler into the sink.
RN42221MUK Rev3_IB 22/08/2012 10:57 Page 8 RN42221MUK Rev3 08/12 Registering your 2 year guarantee Exclusions Your standard 1 year guarantee is extended for an additional 12 months when you register the product within 28 days of purchase with Morphy Richards. If you do not register the product with Morphy Richards within 28 days, your product is guaranteed for 1 year. To validate your 2 year guarantee register with us online at www.morphyrichards.co.
