Specifications

5
Descaling
I
MPORTANT: As this kettle is fitted
with a concealed element it must be
descaled regularly. The frequency of
d
escaling depends on usage and
t
he hardness of the water in your
area.
Excessive scale can cause the kettle
t
o switch off before boiling and may
damage the element invalidating the
w
arranty.
I
t is essential that regular descaling
takes place.
Remove hard scale using a
proprietary descaling product
suitable for stainless steel kettles.
Alternatively use citric acid crystals
(available from most pharmacies) as
follows.
1 Fill the kettle 3/4 full, boil, then
unplug the kettle (remove the
cordless kettle from the base unit)
and stand it in an empty sink or
bowl.
2 Add 50gm of citric acid crystals to
the water gradually, then leave the
kettle to stand. Do not use a more
concentrated solution.
3 As soon as the effervescence
subsides, empty the kettle and rinse
it thoroughly with cold water.
4 Wipe the outside of the kettle
thoroughly with a damp cloth to
remove all traces of acid which may
damage the finish.
IMPORTANT: Ensure that the
electrical connections are
completely dry before using the
kettle.
Cleaning
WARNING: Always disconnect
the plug from the mains and
allow the kettle to cool before
cleaning.
CAUTION: To prevent damage to the
appliance do not use alkaline
cleaning agents when cleaning, use
a soft cloth and a mild detergent.
Wipe the outside with a damp cloth.
IMPOR
TANT: Do not use abrasive
cleaners on the outside of the kettle
which may scratch the surface.
Whistle feature
B
•
There is a switch
 o
n the cordless
base of the product that can switch
the whistle on and off as desired.
Helpline
UK Customers
I
f you have any difficulty with your
a
ppliance, do not hesitate to call us.
W
e’re more likely to be able to help
t
han the store from where you
bought it.
Please have the following
information ready to enable our staff
to deal with your query quickly:
• Name of the product
• Model number and serial number as
shown on the underside of the
appliance.
YOUR TWO YEAR
GUARANTEE
It is important to retain the retailers
receipt as proof of purchase. Staple
your receipt to this back cover for
future reference.
Please quote the following
information if the product develops
a fault. These numbers can be found
on the base of the product.
Model no.
Serial no.
All Morphy Richards products are
individually tested before leaving the
factory. In the unlikely event of any
appliance proving to be faulty within
28 days of purchase it should be
returned to the place of purchase for
it to be replaced.
If the fault develops after 28 days
and within 24 months of original
purchase, you should contact the
Helpline number quoting Model
number and Serial number on the
product, or write to Morphy
Richards at the address shown.
Y
ou may be asked to r
eturn a copy
of proof of purchase.
Subject to the exclusions set out
below (see Exclusions) the faulty
appliance will then be repaired or
replaced and dispatched usually
within 7 working days of receipt.
4
Features
A
⁄
Lid
¤ Lid knob
‹ Spout filter
› Concealed element
fi 360°connector
fl Cordless base unit
‡ Cord storage
· On/off switch
‚ Power on neon
„ Water level indicator
‰ Concealed element (inside)
 Whistle on/off switch
Using
Filling the kettle
1
Wherever possible fill through the
spout, as this helps to free the filter
from limescale build-up.
•
The integrated water level indicator
allows you to easily see the amount
of water in the kettle.
• Always ensure that the level of water
in the kettle is filled to at least the
m
inimum level shown on the water
g
auge. Should your kettle not have
a water gauge, always ensure that
the element is covered.
•
Boil only as much water as you
need as this saves electricity.
2 P
lace the kettle on the base unit,
e
nsuring the kettle locates on to the
3
60° connector.
• The 360° connector allows the kettle
to be located at any position. - ideal
for left and right handed users and
for convenient positioning on the
worktop.
3 Plug in and switch on at the wall
socket.
4 Switch the kettle on. The ‘power on’
neon will light up.
5 When the water boils the kettle will
switch off automatically.
• If you are using the kettle for the first
time, pour away the boiled water
and refill.
6 Lift the kettle from the base unit by
the handle ensuring you hold the
kettle level.
• To re-boil, switch to ON again. If the
kettle has just switched off wait a
minute or so before switching it
back on again.
• If you do not put in enough water, or
switch on the kettle when it is
empty, the safety cut-out will switch
off the power automatically. If this
happens, refill and wait a few
minutes for the element to cool,
then use as normal.
Filter removal
1 Open the lid.
2 Lift the filter upwards from its holder.
3 To refit the filter, slide it into the side
wall guides of the filter holder until it
clicks into place.
WARNING: Unless the filter is
fitted correctly, the kettle lid
may not close and lock securely.
o
Â
‚
⁄
¤
‹
›
fl
·
‡
fi
„
‰
B
Â
B