Instructon Booklet

6
BRITA Memo
• For maximum filter performance and for optimum
taste, it is important to change your BRITA
MAXTRA
+
Filter Cartridge (9) regularly. BRITA
recommends that you replace the cartridge every
4 weeks.
The BRITA Memo (11) cartridge exchange
indicator - tells you when to change your
cartridge. The BRITA Memo is located on the
filter kettle lid.
Setting the BRITA Memo
• To start the BRITA Memo, please press and
hold down the Start Button (12) until all four bars
appear in the display and flash twice. The BRITA
Memo is now set.
• The Cartridge Active Indicator Light (14) in the
bottom right corner of the BRITA Memo indicates
that it is working.
• Every week, one bar will disappear on the
Cartridge Life Gauge (13) to show the remaining
cartridge life. After four weeks, all four bars will
disappear and a flashing arrow will indicate that
the cartridge should now be changed. Insert a
new cartridge according to the instructions, and
reactivate the Memo by following ‘Setting the
BRITA Memo’.
4
6
4
2
Your Filter Cartridge is ready for use.
3
Fill the kettle to the MAX line moulded in the
hopper as normal, and allow to filter through
completely to flush the cartridge. Repeat twice.
2
Push the Filter Cartridge into the BRITA
Hopper (10) until firmly in place.
Replacing the Filter Cartridge
1
Immerse the BRITA MAXTRA
+
Filter Cartridge
(9) in water. Shake gently to remove any air
bubbles.
after 4 weeksfull
KT120009 REV 1.indd 6 21/03/2018 17:00