TS-MPPT-600V-48 Specifications
Solar designers and installers have long sought the
benets provided by a high-voltage charge controller.
By allowing longer and fewer strings, they reduce wire,
cable and breaker costs, and make installations go faster
and easier.
But higher voltages come with the penalty of higher
operating temperatures. The short-cut other brands
take, of using fans to deal with extreme heat, can
shorten the operational life of the controller by sucking
in dirt and debris and adding moving parts that can fail in
the eld. Worse, powered fans are a parasitic load that
reduces eciency in solar harvesting. For these
reasons, even achieving medium voltage is a struggle for
conventional designs. Morningstar’s high-voltage 600V is
a true technical breakthrough.
Advanced digital processing responds much more
quickly and accurately on both input and output sides,
avoiding the transient “swings” of ordinary controllers.
The internal architecture is laid out for maximum
performance and thermal management rather than
economy, with critical parts located where they make the
most engineering sense. And nally, the controller is
built with high quality, “over spec” components used
throughout.
This may go way beyond the standard industry approach,
but it’s business as usual at our employee-owned brand.
With 25 years of experience and well over three million
products made, installers know they can bet their
reputation on ours.
When it’s time to push the design envelope on your next system, our revolutionary 600V TriStar is ready when you are.
Contact your Morningstar distributor for complete information or visit us at www.morningstarcorp.com
TriStarTS-MPPT-600V
Maybe on a COLD day here,
the other charge controllers
will catch up.
But for now, there’s only one high-voltage charge controller that doesn’t need fans to
keep its cool: the Morningstar TriStar TS-MPPT-600V.