TriStar MPPT 600V Installation & Operation Manual

73TriStar MPPT 600V Operator’s Manual
Battery Charging Status LEDs
LED Indication Battery Charging Status
Green Flashing (fast) - 2 to 3 times per second Equalize charging stage
Green Flashing - 1/2 sec on, 1/2 sec off Absorption charging stage
Green Flashing (slow) - 1 sec on, 1 sec off Float charging stage
Green 53.2Volts≤Vbattery
Green & Yellow 52.0Volts≤Vbattery<53.2Volts
Yellow 50.8Volts≤Vbattery<52.0Volts
Yellow & Red 48.0Volts≤Vbattery<50.8Volts
Red Vbattery<48.0Volts
Mechanical
TS-MPPT-60-600V-48 TS-MPPT-60-600V-48-DB
Dimensions:   HWD(in.) 15.4x8.7x5.921.4x8.7x5.9 
    HWD(cm) 39.2x22.1x14.954.2x22.1x14.9
Product Weight (lb / kg) 19.8 / 8.98 28.11 / 12.75
Power terminals (both models):
Minimum wire size 14 AWG / 2.10 mm
2
Maximum wire size 2 AWG / 33.6 mm
2
DB Terminal Blocks (DB model):
Minimum wire size 14 AWG / 2.10 mm
2
Maximum wire size 1/0 AWG / 53.5 mm
2
Recommended Torques: 5/16 in. power board screws 50 in-lb / 5.65 Nm
#10 battery terminal block screws: 20 in-lb / 2.26 Nm
5/16 in. battery terminal block screws: 70 in-lb / 7.91 Nm
1/4 in. terminal block screws: 40 in-lb / 4.52 Nm
(PV and grounding blocks)
RTS / Battery Sense terminals:
Minimum wire size 24 AWG / 0.25 mm
2
Maximum wire size 16 AWG / 1.0 mm
2
Recommended torque 3.5 in-lb / 0.40 Nm
Knock-outs (trade sizes) M20 & 1/2”, 1”, 1 - 1/4”
Mounting Vertical Surface