TriStar MPPT 600V Installation & Operation Manual
56
Networking and Communication
Serial Port Settings
Adjust the serial port settings as follows:
• 9600 BAUD
• 8 data bits
• 1 or 2 stop bits
• no parity
The serial RS-232 connection provides a direct connection between a TriStar MPPT 600V and a
PC (or other serial device). Firmware updates can only be programmed through the RS-232
connection.Theserialconnectionisnottypicallyusedformulti-controllernetworking.However,
networking is possible using a USB hub and USB-Serial cables. For more information, refer to
the “Morningstar Communications Document” on our website at: http://www.morningstarcorp.com