TriStar Manual

17TriStar MPPT Operator’s Manual
Step 3 - Mount to a Vertical Surface
CAUTION: Risk of Burns
Install the TriStar MPPT 150V in a location that prevents casual contact. The TriStar MPPT 150V
heatsink can become very hot during operation.
M6 Screw
Mounting Hanger
Figure 3-2. Attaching the mounting hanger
1. Attach the mounting hanger to the bottom of the TriStar MPPT 150V with the M6 screw pro-
videdasshowningure3-2.
2. Place the TriStar MPPT 150V on a vertical surface protected from direct sun, high tempera-
tures, and water. The TriStar MPPT 150V requires at least 6” (150 mm) of clearance above
andbelowandatleast1”(25mm)oneachsideforproperairowasshowningure3-3
below.
AT LEAST
6” (150 mm)
COOL AIR
WARM AIR
AT LEAST
6” (150 mm)
AT LEAST
1” (25 mm)
Figure3-3.Requiredmountingclearanceforairow.