SunSaver MPPT Specifications

[phone]
[e-mail]
8 Pheasant Run, Newtown, PA 18940 USA
Due to Morningstar’s policy of continuous improvement, product availability, features and specications are subject
to change without notice. Information in this publication has been checked for accuracy; however, no responsibility is assumed for typos or errors.
©2020 Morningstar Corporation
www.morningstarcorp.com
Electrical
Peak efciency 97.5%
Nominal battery voltage 12 or 24 volts
Max. battery charging current 15 amps
Battery voltage range 7-36 volts
Nominal Max. Operating Power*
12 volt battery 200 watts
24 volt battery 400 watts
Max. PV open circuit voltage** 60 volts
Rated load current 15 amps
Self consumption 35 milliamps
Transient surge protection 4 x 1500 watts
Environmental
Operating temperature -40°C to +60°C
Storage temperature -55°C to +100°C
Humidity 100% non-condensing
Tropicalization
Epoxy encapsulation conformal
coating marine rated terminals
Mechanical
Dimensions
16.9h x 6.4w x 7.3d cm
6.6h x 2.5w x 2.9d in
Weight 0.60 kg / 1.3 lbs
Power terminal 16 mm2 / #6 AWG
Enclosure
Die cast aluminum with plastic cover
Battery Charging
Battery types Gel, Sealed, AGM, Flooded
4 Stage charging Bulk, absorption, oat, equalize (optional)
Temperature compensation
Coefcient –5mV/°C / cell (25°C ref)
Range –30°C to +60°C
Set points Absorption, oat, equalize
Technical Specications
Electronic Protections
• PV: Overload, Short Circuit, High Voltage
• Load: Overload, Short Circuit
• Reverse Polarity: Battery, PV and Load
• Lightning and Transient Surges
• High Temperature
• Reverse Current at Night
Options
• Remote Meter
• Remote Temperature Sensor
• USB MeterBus Adapter (UMC-1)
• PC MeterBus Adapter for RS-232
• DIN Rail Mounting Clips
• Ethernet MeterBus Converter for
IP connectivity (including SNMP)
Certications
• CE Compliant
• RoHS Compliant
• UL 1741 / CSA 107.1-01 recognized component
• Manufactured in a Certied ISO 9001 Facility
WARRANTY: Five year warranty period. Contact Morningstar or your authorized distributor for complete terms.
*Input power can exceed Nominal Maximum Operating Power, but controller will limit and provide its rated continuous maximum output current into batteries. This will
not harm the controller (reminder: do not exceed Voc).
**Exceeding Maximum PV Open Circuit Voltage may damage the controller.
Control # MS-002649 Rev 12/19.EN