SunSaver MPPT Installation and Operation Manual
MORNINGSTAR CORPORATION 11
2.0
4 - Meter Connection
A communication port for the Morningstar Remote Meter
or Personal Computer (PC) connection. A MSC adapter is
required, available separately.
5 - Settings Switches
Adjustment switches that dene the operating parameters
of the SunSaver MPPT.
6 - Remote Temperature Sensor (RTS) Terminals
Connection point for a Morningstar RTS (optional) to
remotely monitor battery temperature.
NOTE: The use of a Remote Temperature Sensor is
strongly recommended. Controller location, air ow, and
system power can drastically affect the local temperature
sensor reading. A RTS will provide optimal charging
performance.
7 - Local Temperature Sensor
Measures ambient temperature. Battery regulation is
adjusted based on ambient temperature unless an optional
RTS is installed.
8 - Battery Status LEDs
Provides approximate battery state of charge indication
and also indicates when a system or load fault condition
exists.