User manual

C) Click on the Channel 2 tab to make Channel 2 active. Congure the action drop down
box to read Do Nothing. This will cause Channel 2 in the left graph to go dark, indicat-
ing Channel 2 is no longer contributing to the lighting/load control and has been disabled.
(This may or may not cause a change to the right graph.)
D) Repeat C) above for Channels 3 and 4. (This may or may not cause a change to the
right graph.)
E) Now that Channel 1 has been set for sunset to sunrise and Channels 2/3/4 have been
disabled, the left graph will only show Channel 1 lit from sunset to sunrise. The right graph
will show the lighting control output sunset-to-sunrise (Dusk-to-Dawn); a direct representa-
tion of how the lighting/load will be powered by the controller.
page 8 of 18