Manualshelf

User manual

ManualsBrandsMORNINGSTAR ManualsSolar System AccessoriesSunSaver MPPT-15L Charge controller MPPT 12 V, 24 V 15 A
12345678910
After doing so, MSLoad will begin the update. This may take a few minutes to complete; a
green checkmark will appear when complete. Click Finish.
i) If a red X appears instead of the green checkmark, the update has failed. Re-
turn to STEP 2 and repeat the procedure.
ii) If still unsuccessful after several tries, please contact your authorized Morning-
star Dealer for assistance.
G) Reboot the controller by disconnecting the battery/supply POSITIVE from the control-
ler, waiting 10 seconds, and then re-connecting the wire.
THE FIRMWARE UPDATE IS NOW COMPLETE.
Proceed to Lighting Control Conî‚¿guration.
page 4 of 18