User manual

C) Select boolean OR for Channel 2. This will keep each channel independent so that the
full congurations of both channels are preserved.
D) Channel 3 will be responsible for turning the lights on 2hrs before midnight and keeping
them on until 1hr after midnight. Click the Channel 3 tab and congure it to read:
At 2 h 0 m before midnight turn lights on
At 1 h 0 m after midnight turn lights off
E) Select boolean OR for Channel 3. This will keep each channel independent so that the
full congurations of all channels are preserved.
F) Click on the Channel 4 tab and congure the action drop down box to read Do Noth-
ing.
G) Now that all 3 Channels have been congured, the right graph will show the nal light-
ing control output (the Desired Timing listed above); a direct representation of how the
lighting/load will be powered by the controller.
page 16 of 18