User manual
F) Now that Channel 1 has been set for 2hrs before sunset to 2hrs after sunset, Channel
2 has been set for 3hrs before sunrise to 3hrs after sunrise, and Channels 3/4 have been
disabled, the right graph will show the nal lighting control output (the Desired Timing
listed above); a direct representation of how the lighting/load will be powered by the con-
troller.
Example #3
Desired Timing:
• On from 1hr before sunrise to 2hrs before midday
• On from 3hrs after midday to 1hr after sunset
• On from 2hrs before midnight to 1hr after midnight
• Off all other times
A) Channel 1 will be responsible for turning the lights on 1hr before sunrise and keeping
them on until 2hrs before midday. Click Enable Lighting checkbox and make sure the
Channel 1 tab is active. Congure Channel 1 to read:
At 1 h 0 m before sunrise turn lights on
At 2 h 0 m before midday turn lights off
B) Channel 2 will be responsible for turning the lights on 3hrs after midday and keeping
them on until 1hr after sunset. Click the Channel 2 tab and congure it to read:
At 3 h 0 m after midday turn lights on
At 1 h 0 m after sunset turn lights off
page 15 of 18