Installation Guide

9Meter Hub Operator’s Manual
2.3 DIN Rail Mounting
The Meter Hub mounts to standard 35 mm (1-3/8”) DIN rail.
1
2
3
E
M
ETER
H
U
B
E
M
E
TER
H
U
B
MeterBus Communication Hub
FOR INDOOR
USE ONLY
MODEL: HUB-1
FOR USE WITH
MORNINGSTAR
METERBUS NETWORKS
ONLY
E
M
ETER
H
U
B
E
M
E
TER
H
U
B
MeterBus Communication Hub
FOR INDOOR
USE ONLY
MODEL: HUB-1
FOR USE WITH
MORNINGSTAR
METERBUS NETWORKS
ONLY
Figure 2. Mounting the Meter Hub on DIN rail.
Step 1
The DIN rail location should be protected from direct sun, high
temperatures, corrosive fumes, and water. Do not install in a con ned
area where battery gasses can accumulate.
Step 2
Place the Meter Hub over the DIN rail in the location where it is to be
mounted. Make sure there is suf cient room above and below the Meter
Hub for wire connections.
Step 3
The Meter Hub was designed for installation onto a DIN rail without the