Installation manual

The old GE400 has been displaced by a PLT350 option using the Aurora Power wind

interface to regulate Voc. Please note that the popular SMA Windy Boy inverter range has

been recently withdrawn from the market. This leaves the Aurora wind inverter range that is

globally available and approved for wind and hydro input. For the UK, NZ and AUS markets

there is also the EnaSolar inverter range.

Aurora PVI-4000 wind interface for 230 VAC markets.

Aurora PVI-7200 wind interface for 120 VAC markets.

The wind interface is only needed for

cable voltages above 200 VDC.

Use the PLT350 in such applications.

The Aurora UNO-2.0-I-W and

UNO-2.5-I-W are the latest

single phase string inverters for

wind and hydro applications.

Our global dealers have reported good results with many makes of grid connect inverters,

and most will work well. The main issue is that many makes do not warrant their equipment

for hydro input and have only be designed and tested on solar PV panels. For more

information refer to our 2014 Technical Manual.

If you try an inverter and it works and tracks well please advise us so we can add it to the list

of inverters that have been shown to work.