Installation manual

Angled guides and screen - the best!

Perforated box in concrete

Commercial intake on road culvert

Perforated box

Stainless woven tube from scrap yard Intake made from stainless steel scrap

Intake screens such as these can be purchased. However, they are easy enough to make to

suit your site. You can use a stainless steel mesh and a plywood box, make sure you

support the screen from behind with stainless steel rods/frame otherwise during floods the

mesh will be pushed in. A fine, smooth stainless steel gauze with a hole size typically 1-3mm

should then be placed over the stronger frame. This smooth gauze will allow debris to slide

off easily and prevent small aquatic life forms from entering the pipe line.