Installation manual

Labelling requirements

Local codes and standards list many labels and notices that must be installed on these

systems. Consult these documents and your local installer to make sure you comply.

Generally labels cover the following:

 Breakers should be clearly labelled and state what it is

they do.

 DC wire should be clearly labelled to avoid confusion

with AC wires.

 Emergency shutdown procedure should be clearly

stated, markers on your property may be required to

direct emergency services.

 Normal start up and shut down procedures should be

clearly stated. System manual should be supplied.

It should be noted that durable label kits for on and off grid solar PV systems are available

that comply with relevant standards from your local renewable energy installer. Hydro

systems should have similar labels.

8.1. Feedback

We welcome your constructive feedback on how we can improve our products, including this

manual. Testimonials for our hydro products can be viewed at

www.powerspout.com/testimonials/

As EcoInnovation endeavours to reduce their footprint in many different ways, e.g. to save

on paper and airfreight, this manual is only supplied electronically to customers. We

encourage users to minimise printing where appropriate and to provide feedback via our

website or via email (see contact details inside front cover).