Instruction manual

5
Operating environment
Operate this unit in the following environment:
 Temperature: +5°C up to +35° (storage temperature -10°C up to +50°C)
 Humidity: 20% up to 85% (storage: 10% up to 90% rel. humidity) no condensation
 No direct sunlight
 Reasonably free from dust
 subject to only little or no vibration
 free from air-borne salt
 no harmful chemicals
 the machine may not be exposed to water
Warning:
Keep this unit and the power cord away from heaters and heater vents. Excessive heat could melt
the cover or power cord covering and result in a fire or an electrical shock.
Do not place metal objects or bins containing liquids on top of the machine. The entry of any metal
object or liquid could result in a fire or an electrical shock.
Do not insert any metal or easily-flammable objects inside the machine. This could result in a fire or
an electrical shock.
Do not use flammable sprays inside or near the machine (e.g. when cleaning the unit). Such
flammable gas may ignite and cause a fire or combustion.
Caution:
Do not install this machine at a location with excessive humidity or where contact with water is
possible. This could result in deterioration of the insulation, a fire or an electrical shock.
Install this unit on a level, stable stand or floor with sufficient space around it. Failure to do so could
result in the unit overturning and causing injury.
Disconnect the power plug from the power outlet before attempting to move the machine. Failure to
do so could result in power cord damage, a fire or an electrical shock.
Always disconnect the power plug from the power outlet when the unit is not to be used for an
extended period of time. Failure to do so could result in a fire to leakage current if the insulation
should deteriorate.