Instruction manual

5-4
Chapter5 Cleaning the Unit
1-4. Cleaning the Paper Sensor
Paper sensor
Clean the paper sensor using an air
duster or a cotton bud.
1-5. Cleaning the Ejection Gate Sensor
Ejection gate
sensor
Stacker rollers
Clean the ejection gate sensor, located
on the back of the stacker rollers using
an air duster.
1-6. Cleaning the Paper Ejection Belts
Stacker roller
Paper ejection belt
1
Move the stacker rollers to “5” by hand.
2
Rotate the stacker roller, and clean o
the dirt with a cloth moistened with
alcohol.