Instruction manual

3-20
Chapter3 Advanced Operation
If double-feed occurs, increase the paper separating pressure by 0.5 at a time. Paper separating
pressure increases as the scale value increases.
Do not use ne quality paper such as copy paper with the paper feed pressure and paper
separating pressure settings for art paper and coated paper. Due to the high paper feed
pressure, double-feed occurs more easily. In addition, due to the high paper separating
pressure, the paper may be damaged at the lead edge. When using ne quality paper, always
return to paper feed pressure and paper separating pressure settings to levels suitable for
ne quality paper.
5
Close the top cover.
6
Press the key for test folding and check the nish.
Other steps are the same as standard folding of standard paper. Refer to Chapter2 "Basic Operation"
“1.Standard Folding of Standard Paper” ( p2-1).
6. Correcting Folding Misalignment
Folding misalignment consists of two types; “folding misalignment along the vertical length of the paper”
and “folding misalignment along the sides of the paper.”
6-1. Correcting Folding Misalignment along Vertical Length of Paper
Paper feeding direction
Misalignment to
be corrected
When folded paper is misaligned along the vertical
length as shown in the gure, turn the ne adjustment
knob to correct the misalignment.
• Use the mark on the folding plate just as a reference. You may need ne adjustments
according to various conditions such as environmental conditions (temperature, humidity),
paper quality, paper thickness, paper ber direction, cutting accuracy and printing
conditions.
• The ne adjustment position of the folding stopper cannot be registered. Once a paper size
or folding mode is changed or the power is turned o, the stacker rollers will return to the
automaticallyy set position. You need to adjust the position again.