Instruction manual

3-16
Chapter3 Advanced Operation
Cross folding lever
13
Take out the cross folding lever stored
inside the top cover.
14
Close the top cover.
Cross folding lever
Weight roller
Side guide
15
Attach the cross folding lever to the
pillar located on the side guide of the
non-operator' side.
Place the weight roller on the folding line.
Cross folding lever
To replenish paper, lift the cross folding
lever.
16
Press the key for test folding and
check if the paper is ejected smoothly.
If mis-feed or double-feed occurs, refer to
Chapter2 "Basic Operation" “1.Standard
Folding of Standard Paper” "1-3. Operation
Procedures ( p.2-2).
17
If the paper is not ejected smoothly,
change the position of the stacker
rollers.
While pressing the key, press the or
key to change the stacker rollers to a desired
position.