Instruction manual

3-15
Chapter3 Advanced Operation
Paper set lever
6
Lower the paper set lever.
The paper feed tray will be raised.
Make sure that you lower the paper set
lever. If you start operations without the
paper set lever lowered, the paper feed
rings will run idle, causing the machine
to stop.
A4
Single fold
Count:0
7
Press the key to change the paper
size from [A3](EU)/[LD](North America)
to [A4](EU)/[LT](North America).
A4
Single fold
Count:0
8
Check if [Single fold] is displayed on the
LCD display. If not, press the key to
select [Single fold].
Top cover
9
Open the top cover.
Set screw
Paper feed ring
10
Loosen the set screw of the paper feed
ring.
11
Move the paper feed ring at the far end
to the folded line of the paper.
12
Tighten the set screw of the paper feed
ring.