Instruction manual

3-11
Chapter3 Advanced Operation
3. Standard Folding of Non-Standard Size Paper
Do not put neither hands nor ngers inside the machine during operation. You also need to be
careful not to get your hair, accessories and wear caught in the machine.
Paper other than the standard size paper are called non-standard size paper. The paper size that can be used
as non-standard size paper is as follows.
Length(L):
182 to 432 mm/
7.16 to 17.00 inches
Paper feed
direction
Width:128 to 297 mm/
5.04 to 11.69 inches
Maximum: 297 (W) x 432 (L) mm/11.69 (W) x 17.00 (L) inches
Minimum: 128 (W) x 182 (L) mm/5.04 (W) x 7.16 (L) inches
* Minimum for single fold: 90 (W) x 135 (L) mm/
3.54 (W) x 5.31 (L) inches
1
Measure the length (L).
Side guide
Fixing screw
Side guide
Fixing screw
2
Loosen the xing screws of the side
guides, and move the side guides to t
the paper width.
Paper
Paper set lever
Guide plate
3
Raise the paper set lever and place
some paper on the paper feed tray.
Push in the paper until its lead edge touches
the guide plate.