Instruction manual

3-8
Chapter3 Advanced Operation
Paper set lever
4
Lower the paper set lever.
The paper feed tray will be raised.
Make sure that you lower the paper set
lever. If you start operations without the
paper set lever lowered, the paper feed
rings will run idle, causing the machine
to stop.
Accordion fold (example)
5
Fold a piece of paper as desired and
measure the dimensions of the A, B and
C.
The folding sizes should be within the
following ranges.
A: 40 to 325 mm/1.57 to 12.80 inches
(folded size for the rst folding plate)
B: 40 to 216 mm/1.57 to 8.50 inches
(folded size for the second folding plate)
C: 216 mm/8.50 inches or shorter
(folded paper length)
Single fold Double fold Irregular
accordion fold
Letter fold Accordion fold Gate fold
Paper feed direction
Paper ejection direction
A (B=0mm)
B
A
B
A
B
B
A
A
B
A
The position of A and B
CF
Count:0
6
Press the key to set a paper size
to [CF].
CF CF1 length
40.0mm
CF
7
Set the stopper position of the rst
folding plate to the dimension of A.
While pressing the key, press the or
key to change [CF1 length] from [40.0mm](EU)/
[1.57inch](North America) to the dimension of
A.
CF CF2 length
0.0mm
CF
8
Set the stopper position of the second
folding plate to the dimension of B.
While pressing the key, press the or
key to change [CF2 length] from [0.0mm](EU)/
[0.00inch](North America) to the dimension of
B.
(Fold out)
(Z fold)