Instruction manual

3-6
Chapter3 Advanced Operation
7
After completing adjustments, set the
count mode either to the add count or
to the subtract count, then press the
key to start folding operations.
Refer to Chapter2 "Basic Operation"
“1.Standard Folding of Standard Paper” "1-3.
Operation Procedures ( p.2-2).
8
After completing the work, remove the
guide plate unit.
• Leaving the guide plate unit attached
may result in problems when other types
of paper are used.
• When folding ne quality paper 52.3 g/
m
2
(EU)/ 14 lb (North America) into four,
do not use the guide plate unit.
9
Store the removed guide plate unit
inside the top cover.
Once a paper size or folding mode is changed
or the power is turned o, the stacker rollers
will return to the automatically set position.