Instruction manual

2-5
Chapter2 Basic Operation
Test folded sample
13
Check the nish of test folding.
Check for folding misalignment using the
second test folded sample.
If folding misalignments occur, refer to
Chapter 3 "ADVANCED OPERATION"“5.
Correcting Folding Misalignment”
( p.3-20 ).
Depending on the count mode you choose,
the procedures to follow will change.
Use the subtract count mode to specify the
number of sheets to be processed.
Otherwise use the add count.
Subtract count mode: go to step 14.
Add count mode: go to step 16.
SR set
1
14
If the paper is not ejected smoothly,
change the position of the stacker
rollers.
While pressing the key, press the or key
to change the position.
When gate folding large size paper such
as A3 (EU)/ LD (North America) under high
temperature and high humidity, folded
paper may misalign. Change the position
of the stacker rollers to "2" from "1."
15
Change the count mode to the subtract
count mode.
A3
Single fold
Count:0
The add count mode has been selected by
default and [ Count : 0] is displayed on the
LCD display.
A3
Single fold
Count:0
To change it to the subtract count mode,
press the key to display [ Count : 0].
A3
Single fold
Count:100
16
Specify the number of sheets to be
processed.
While pressing the key, press the or
key to specify the number.
17
Press the key to start folding
operations.