Instruction manual

2-4
Chapter2 Basic Operation
following order with a gure:
Single fold, Double fold, Fold out (irregular
accordion fold), Letter fold, Z fold (accordion
fold), Gate fold
Paper pressure
adjustment knob
8
Move the paper feed pressure
adjustment knob to "0."
Move the knob to the right or left while
pulling it upward.
If the paper slips and no paper is conveyed,
change the paper feed pressure to “1.”
If several sheets of paper are fed at the same
time (double-feed), decrease the paper feed
pressure to “–1.”
Top cover
9
Open the top cover.
Separating pressure adjustment dial
10
Set the separating pressure adjustment
dial to “0”.
If several sheets of paper are fed at the
same time (double-feed), increase the paper
separating pressure to "1" or "2."
When adjusting the separating pressure,
increase the pressure gradually in steps of 0.5.
Paper separating pressure increases as the
scale value increases.
11
Close the top cover.
12
Press the key for test folding.
When the key is pressed, the folding
stopper starts moving to the certain position
according to the set paper size and folding
mode. Two sheets of paper will be ejected.