Instruction manual

2-2
Chapter2 Basic Operation
1-2. Standard Folding
There are six types of standard folding modes: single fold, double fold, irregular accordion fold (fold out),
letter fold, accordion fold (z-fold) and gate fold. Paper is folded as shown below when the paper is placed on
the paper feed tray with its print side facing upward.
Single fold Double fold Irregular
accordion fold
Letter fold Accordion fold Gate fold
Paper feed direction
Paper ejection direction
1-3. Operation Procedures
Do not put neither hands nor ngers inside the machine during operation. You also need to be
careful not to get your hair, accessories and wear caught in the machine.
Power switch
1
Insert the power cord in the wall socket
and turn on the power.
Press “ I ” to turn on the power.
Press “O" to turn o the power.
When the power is turned on, the
folding stopper of each folding plate and
the stacker rollers move to the default
positions. Wait until the machine stops
completely.
Side guide
Fixing screw
Side guide
Fixing screw
2
Loosen the xing screws of the side
guides, and move the side guides to t
the paper width.
(Fold out)
(Z fold)