Instruction manual

1-9
Chapter1 Before Operation
No. Name Function
[1] First folding plate Guide plate for deciding a paper folding position. First folding is
made using this plate.
[2] Control panel Used when operating the machine. Error messages are also
displayed on the LCD display.
[3] Second folding plate Paper folded at the rst folding plate is sent to the second folding
plate. Second folding is made using this plate. This plate is not
used when folding paper into two.
[4] Power switch Turns on and o the power.
[5] Paper receiving tray Receives folded paper ejected out.
[6] Paper receiving stopper Stops paper ejected out from the machine.
[7] Stacker rollers Ejects folded paper from the machine.
[8] Paper set lever When lowered, the paper feed tray is raised.
[9] Support paper feed plate Supports paper stacked on the paper feed tray.
[10] Paper feed tray Used to stack paper to be folded.
[11] Side guide Holds paper stacked on the paper feed tray.
[12] Top cover Prevents the user from touching the moving parts.
[13] Jam correction knob Removes paper jammed around the rubber roll by turning the
knob.
[14] Paper feed ring Feeds paper into the machine.
[15] Rubber roll Sends paper to the rst folding plate.
[16] Separating pressure adjustment dial Adjusts the paper separating pressure.
[17] Paper feed pressure adjustment knob Adjusts paper feed pressure.
[18] Slant correction paper feed knob Corrects misalignment along sides of paper.