Instruction manual

1-4
Chapter1 Before Operation
2-3. Locking the Bearing Support Levers
The bearing support levers are released at shipment to prevent the rubber roll from becoming distorted.
After removing the press release levers, be sure to lock the bearing.
Support paper feed plate
Paper receiving
stopper
Paper receiving
tray
1
Unfold the paper receiving tray.
2
Unfold the support paper feed plate.
• If you unfold the support paper feed
plate before unfolding the paper
receiving tray, the paper receiving
stopper may be damaged. Make sure
that you unfold the paper receiving tray
rst.
• The paper receiving tray and support
paper feed plate are foldable so that you
can easily move or store the machine.
Make sure that you unfold them before
using the machine.
Top cover
3
Open the top cover.
Bearing support lever
Operator’s side
4
Turn the bearing support lever on the
operator’s side in the direction of the
arrow.
The bearing will be locked.