Instruction manual
v
Contents
Contents
Safety Precautions .............................................i
Power Supply .................................................................................i
Operating Environment ...........................................................ii
Maintenance / Other ............................................................... iii
WARNING / CAUTION Labels ................................................ iv
Chapter1 Before Operation
1. Features ................................................... 1-1
2. Setting Up the Machine ......................... 1-2
2-1. Components ..............................................................1-2
2-2. Removing the Press Release Lever ................... 1-3
2-3. Locking the Bearing Support Levers ............... 1-4
2-4. Attaching the Parts ................................................. 1-5
3. Names and Functions ............................. 1-8
4. Describing Control Panel .....................1-10
5. Screen Menus ........................................1-11
6. Handling Paper .....................................1-12
6-1. Paper Used ...............................................................1-12
6-2. Precautions on Stacking Paper ........................1-12
7. Emergency Stop....................................1-14
Chapter2 Basic Operation
1. Standard Folding of Standard Paper .... 2-1
1-1. Standard Paper .........................................................2-1
1-2. Standard Folding ..................................................... 2-2
1-3. Operation Procedures ...........................................2-2
Chapter3 Advanced Operation
1. Standard Folding of Special Paper ....... 3-1
1-1. Single Folding Thick Paper ...................................3-1
1-2. Double Folding Thick Paper ................................ 3-2
1-3.
Double Folding B6 Thin Paper (EU)/Small
Thin Paper (North America) ............................................3-4
2. Custom Folding of Standard Paper ...... 3-7
3.
Standard Folding of Non-Standard Size
Paper .............................................................. 3-11
4. Cross Folding ........................................ 3-13
4-1. Cross Folding Standard Size Paper .................3-14
4-2. Cross Folding Non-Standard Size Paper .......3-17
5. Using Art Paper and Coated Paper .....3-19
5-1. Characteristics of Art Paper and Coated
Paper ...........................................................................3-19
5-2. Operation Procedures .........................................3-19
6. Correcting Folding Misalignment .......3-20
6-1. Correcting Folding Misalignment along
Vertical Length of Paper .....................................3-20
6-2. Correcting Folding Misalignment along
Sides of Paper ..........................................................3-23
Chapter4
Troubleshooting Guide
1. Correcting Deformed Folding ....................... 4-1
2. Removing Jammed Paper ...................... 4-1
2-1. When Paper Has Jammed Near the Paper
Feed Ring .................................................................... 4-1
2-2. When Paper Has Slipped at the Paper
Feed Section .............................................................. 4-2
2-3. When Paper Has Coiled Around the Rubber
Roll ................................................................................. 4-3
2-4. When Paper Has Jammed at the First
Folding Plate ..............................................................4-4
2-5. When Paper Has Jammed at the Second
Folding Plate ..............................................................4-5
2-6. When Paper Has Jammed Near the
Stacker.......................................................................... 4-7
3. Error Messages ....................................... 4-8
4. Troubleshooting ..................................... 4-9
Chapter5 Cleaning the Unit
1. Cleaning Each Section ............................ 5-1
1-1. Cleaning the Rubber Roll ..................................... 5-1
1-2. Cleaning the Paper Feed Rings .......................... 5-2
1-3. Cleaning the Paper Separator ............................ 5-3
1-4. Cleaning the Paper Sensor .................................. 5-4
1-5. Cleaning the Ejection Gate Sensor ................... 5-4
1-6. Cleaning the Paper Ejection Belts ..................... 5-4
Chapter6 Appendix
Specication .................................................. 6-1