Specifications

PART NO.
DESCRIPTION
RECOMMENDED SPARES
652-011 Switch - Low Current Coil - Black
172-05-01 Paper Gate Assembly
177-01-01 Perforator Assembly
176-213-02 Dynamic Blade Set - Standard
176-081-01 Worm Wheel - Gap Set
176-02-01 Blade Adjuster Assembly
602-160 Plain Bush - Dynacrease Guide Block
604-100 Gas Spring - Perf. Unit
604-103 Gas Spring - Delivery
607-005 Belt - Vacuum Roller
607-045 Multi Beam Coupler
607-175 Belt - Drive
607-171 Timing Belt - Drive
613-023 Fuse - Fast Blow Ceramic3.15A - 20 x 5mm -
613-351 Micro Switch - Guard
613-365 Emergency Stop Switch - Double Pole
626-007 Anti-Static Sensor Bar
652-043 Switch Thermal O/Load 20A Black
681-011 Fuse - 315mA - 20 x 5mm Anti-surge - Ceramic
681-019 Fuse - 6.3A - 20 x 5mm - Anti-surge Ceramic
Page 57
SYSTEM
176-213-01 Dynamic Blade Set - Narrow
607-183 Timing Belt - 190XL 062
175-28-01 Butterfly Valve - Stepper
76-262 Stepper Motor - Roller Drive
76-266 Lead - Fold Knives Sensor
75-258 Anti - Static Transformer
76-258 Stepper Motor - Belt Drive
76-259 Stepper Motor - Roller Position
124-01-27 Lead - Delivery Roller Pot
175-072-01 Lead - Jam Detector - Emitter
175-072-02 Lead - Jam Detector - Receiver
175-21-01 Vacuum Roller Assembly
NOTE.....
The items listed above represent parts which are subject to wear, loss, or accidental
damage, and is included for your guidance only.
Replacement of parts fitted to your machine require specialist knowledge and should
therefore be entrusted to your dealer.
DigiFold Pro