Specifications

Trouble Shooting
Page 51
SYSTEM
Error Screens (Continued)
Blade Busy
Blade Home Failure 1
If the machine stops and error message 05 is displayed on the touch screen, this
indicates that the blade is busy. Try to operate the machine again, If this fails it is
advised to contact a Service Engineer.
If the machine stops and error message 06 is displayed on the touch screen, this
indicates that there may be some creasing errors, and that the creasing pressure
should be checked, (also check for a double that may have got through, causing this
error).
If the machine stops and error message 07 is displayed on the touch screen, this
indicates that the crease blade did not get back to its home position correctly or
at the correct time. Causes, can be excessive blade pressure (suspect a double), or
Some kind of jam which caused more than one sheet thickness to be creased.
Blade Home Failure 2
DigiFold Pro