Specifications

Page 17
SYSTEM
Roller Gap Set & Tilt Mechanism Page.
To get to the roller gap setting page click the lower tab
Roller gaps may be in the range of 0.05mm to 1.5mm, with increments of 0.05mm
The roller gaps can be adjusted to suit the thickness of the material being creased or
folded; and the type of fold being produced. The roller gaps may also require adjustment
if cracking of the print is noticeable. (see Fig 13.1 below).
Setting the Roller Gaps (Gap 1, Gap 2 & Gap 3)
Roller Gap 3
Roller Gap 1
INFEED
FIG 13.1
Roller Gap 2
Current gap setting
for 2nd Fold Roller
Current gap setting
for 1st Fold Roller
Recommended gap values -
based on paper thickness.
Current gap
setting for 3rd
Fold Roller
Current set Tilt Angle
DigiFold Pro
Operating the DigiFold Pro