Specifications

Page 15
SYSTEM
Fold Selection - For quick setting of crease positions on standard size sheets
Highlighted fold is type currently selected, other folds may be selected
Currently selected fold is shown in the status area.
Page Thickness - On
selection of status
area is replaced with
a calculator for
inputting new values
Range = 0.1 to 0.4mm
Increments of 0.01mm
Arrows may be
selected to increase
or decrease the page
size in 0.1mm
increments
Batch Button - Image
is identical to that
shown in the status
area. On selection the
status area is replaced
with a calculator for
inputting new values.
Batch sizes of 1 to
998 may be set.
Paper Type - As a
guide choose as
follows:
0 - approx 0.1 thk
3 - approx 0.3+ thk
1 - approx 0.2 thk
2 - approx 0.3 thk
Paper Length - On selection the status area is replaced with a
calculator for inputting new values. Length range = 190mm - 900mm
Pre-set Paper sizes for
quick insertion - Standard
sizes for country origin
would be shown.
Paper input
Setting Pages.
Paper settings Page
Paper size Selection.
DigiFold Pro
Operating the DigiFold Pro