Specifications

Page 10

Adjustable

Side Lay

Suction

Slot Knob

Vacuum

Bleed Knob

FIG 10.1

FOLDING

TWO THICKNESSES

OF PAPER

WARNING.

DO NOT ADJUST THE

PAPER GATE WHILE THE

MACHINE IS RUNNING OR

THE SUCTION DRUM MAY

BECOME DAMAGED.

Adjusting the Paper Gate

Set the height of the Paper Gate to approximately two thicknesses of paper, by turning the

disc j. An excessive gap is a most likely cause of double sheet feeding.

This setting is only intended as a guide, for instance, sheets with an upward curl will

require this setting to be increased.

Blade Tilt

Knob

Roller Gap 1

Knob

Roller Gap 2

Knob

Roller Gap 3

Knob

Air Seperation

Knob

Setting the Suction Slot

The suction slot is located inside the vacuum roller and can be adjusted by releasing and

moving the suction knob horizontally in either direction to the required position.

For light stocks set the knob to the left and for heavier stocks set the knob to the right.

Operating the DigiFold Pro