How-To Guide

ManualsBrandsMoreinTech ManualsAudio EquipmentBluetooth Bone conduction headphone

Thanks for purchasing ES-768 smart bone conduction headphones !

Product Overview

① Play/pause Key

② Multi-function key (Power on/off, make/answer calls, Bluetooth connection)

③ LED Indicator

④ Volume control key

⑤ Micro-USB Charging port

⑥ Microphone

Summary of content (5 pages)

PAGE 1
Thanks for purchasing ES-768 smart bone conduction headphones ! Product Overview ① ② ③ ④ ⑤ ⑥ Play/pause Key Multi-function key (Power on/off, make/answer calls, Bluetooth connection) LED Indicator Volume control key Micro-USB Charging port Microphone
PAGE 2
How to set up ES-768 1. Pairing When you pair the Bluetooth headphone for the first time (and the ES-768 is off), press and hold the key for 5 seconds and release it when you hear "Power on, Enter pairing". The led light flashes red and blue when in pairing mode 2. Connecting Enter the Bluetooth settings on your phone, scan for new Bluetooth devices and select "ES-768". When the connection is made, you will hear a ‘connection successful’ message on the ES-768.
PAGE 3
B: Place the upper curve over your ear shells C: Place at your nape Earplugs If you want to listen to your favorite music without disturbing ambient sounds, use the supplied silicone earplugs in environments where it is safe to block out ambient noise, like on a train or airplane. LED Light status Color Explanation The red indicator flashes once every 3 seconds Unit has Low battery power. Please recharge.
PAGE 4
Mute microphone / un-mute Click " None " key Note: The volume control function only works during music play or making a phone call. Troubleshooting Problem Possible Cause Not powering on Bluetooth pairing unsuccessful Solution Low battery Charge the headphone Beyond the maximum effective range Place the headphone closer to the device which you want to connect with. Specifications Play Time Charging Time Up to 4.5 hours 1.
PAGE 5
Manufacturer’s Declarations 1. CE Certification of Conformity • EU-RED Certificate of Conformity Radio Equipment Directive (RED) 2014/53/EU 2. FCC Regulations: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.