Use and Care Manual

5 PCS

NO.

SKETCH QTY SKETCH

Spring Washer(1/4")

NO.

SKETCH QTY

1 PC

Allen Wrench(4mm)

DESCRIPTION DESCRIPTION

HARDWARE LIST

PARTS LIST

ASSEMBLY INSTRUCTIONS

Washer(1/4")

5 PCS

1 PC

Step 1

Chair Seat

1 PC

Bolt(1/4"*1-1/4")

5 PCS

Note: At this step, do not fully tighten the bolts.

Lower Leg Frame

Upper Leg Frame

PAGE 1
ASSEMBLY INSTRUCTIONS HARDWARE LIST NO. SKETCH DESCRIPTION PARTS LIST QTY A Bolt(1/4"*1-1/4") 5 PCS B Washer(1/4") 5 PCS C Spring Washer(1/4") 5 PCS D Allen Wrench(4mm) 1 PC NO. SKETCH DESCRIPTION QTY 1 Chair Seat 1 PC 2 Lower Leg Frame 1 PC 3 Upper Leg Frame 1 PC Step 1 Note: At this step, do not fully tighten the bolts.
PAGE 2
ASSEMBLY INSTRUCTIONS Step 2 Step 3 Adjust Pre-installed Levelers height to achieve balance Step 4
PAGE 3
ASSEMBLY INSTRUCTIONS HARDWARE LIST NO. SKETCH DESCRIPTION PARTS LIST QTY NO. SKETCH DESCRIPTION QTY A Bolt(1/4"*5/8") 12 PCS 1 Top Panel 1 PC B Washer(1/4") 12 PCS 2 Support Frame 1 PC C Spring Washer(1/4") 12 PCS 3 Side Frame 1 PC D Allen Wrench(4mm) 1 PC 4 Upper Leg Frame 1 PC Step 1 Note: At this step, do not fully tighten the bolts. Step 2 4 B C A D 2 3 B C A D Note: At this step, do not fully tighten the bolts.
PAGE 4
ASSEMBLY INSTRUCTIONS Step 3 2 D 3 A C B 1 4 Note: At this stage, tighten all Bolts at all joints fully in a sequential manner. Step 4 Adjust Pre-installed Levelers height to achieve balance.