Specifications

Warning:
The blade shutter rotates 180° between individual snapshots. Camera cover
could be opened only when the shutter is closed. If for instance the camera
is unplugged from power adapter while exposing and the shutter remains
open, it can be damaged while removing the camera cover.
After removing the screws carefully turn the camera head by the telescope
adapter upward. Gently pull the front part of the case. Notice there are two
cables, connecting the filter wheel motor and the filter position optical bar,
plugged into the electronics board. It is not necessary to unplug these cables
to change filters, but if you unplug them, take care to connect them again in
the proper orientation!
Every filter position in the wheel is defined by the index hole. The hole
defining the first position is preceded by another hole. Filter numbering is
illustrated by the following picture:
59
Illustration 26: Filters can be changed after opening the camera case front shell