Specifications

Windows XP and Windows Vista System Driver Installation
The operating system notifies the new USB device was plugged in the
“Found new hardware bubble”. The system then opens the “Found New
Hardware” Wizard.
1. The wizard offers searching for suitable driver on Windows
Update site. Reject this offer (choose “No, not this time”) and click
“Next” button.
2. Choose the “Install the software automatically” in the next step.
Insert the CD-ROM into the drive and the wizard will continue by
the next step.
It is not necessary to install files from CD-ROM. It is possible to
copy the folder containing driver files e.g. to shared network
volume, USB Flash Disk etc. Then it is necessary to choose the
“Install from a list or specific location” and to define the path to
driver files.
3. The wizard starts to copy files. But Windows XP checks for driver
file digital signature. If it cannot find the signature, it notifies the
user by a message box. Click “Continue Anyway”, the digital
signature is only an administrative step and does not influence the
proper functionality.
4. The wizard then finishes the installation and the camera is ready to
work.
Please note the Windows system keeps the information about installed
devices separately for each USB port. If you later connect G3 camera to
different USB port (different USB connector on the PC or through the USB
hub), Windows reports “found new hardware” again and asks you to install
the software. Repeating the installation again brings no problem, just choose
“Install automatically” option and Windows will reuse already installed
drivers.
SIPS Software Installation
The Scientific Image Processing System (SIPS) software package is
designed to operate without the necessity to be installed in any particular
28