Specifications

These cameras are able to acquire color image in single exposure, without
the necessity to change color filters. On the other side color mask brings
lower sensitivity and limits the capability to perform exposures using
narrow-band filters etc.
Because each pixel is covered by one of three basic color filters, it is
necessary to compute (interpolate) remaining two colors for each pixel,
which of course limits resolution of color image. Imaging using color
detectors is described in the “Color images” chapter.
CCD Chip
Quantum efficiency (sensitivity) of CCD detectors used in G3 and G4
cameras depends on the particular camera model.
Illustration 3: Quantum efficiency of CCD detectors used in G3 and G4 cameras
Inherent dark current of these detectors is quite low compared to other CCD
detectors, suitable for scientific applications, which results into very good
signal/noise ratio.
Model G3-6300
G3-06300 uses 6 MPx Truesense Imaging KAF-6303E Class 1 or 2 CCD
chip.
Resolution
3072×2048 pixels
10