Specifications

23
Mounting
DataLab PC can be mounted on the standard 32 mm DIN-rail or can be placed anywhere
on the suitable flat space.
Mounting the computer to the DIN-rail is simple: first insert the bottom side of the DIN
clip to place the DataLab PC on the DIN-rail. Then push the case upwards until the upper
side of the DIN clip hangs to the rail. Removing the computer from the DIN-rail is very
similar: again push the DataLab PC case upwards until the upper side of the DIN clip
releases from the DIN-rail to remove the computer.
If the DataLab PC should be placed on appropriate place, flexible pads are placed on the
back of the case instead of DIN clips.
Take care to wire the power lines correctly respective to polarity. Also ensure all cabling
and connectors are well placed and properly fixed.